Lawn mowing

Can a lawn crew get through my backyard gate?

If your gate looks too narrow for a riding mower, you may still have options. The usable opening and approach determine which equipment can safely reach the lawn. Before we quote a fenced backyard, we need to know how much space we have to get through and how we’ll approach the gate from the driveway.

How to measure your gate

  1. Open the gate as far as it normally goes. If it stops against a bin, the house or a fence panel, leave it in that position for the measurement.
  2. Measure straight across the narrowest part of the open passage. A latch, hinge, stop block or the edge of the open gate can stick out past the post. Start and end the tape at whatever sticks out farthest.
  3. Check the path on either side. A gate can be the widest part of a side yard if an air conditioner, step or raised planter narrows the path. Write down that second measurement if it’s smaller.

A four-foot fence panel doesn’t necessarily leave four feet to drive through. The same goes for mower sizes. A mower sold as a “42-inch” model cuts a 42-inch strip. Its chute or other parts can make the machine wider. The measurement lets us check the equipment we’d actually bring.

Show us the turn as well

Stand back a few paces on the driveway side and take a photo with the gate open. Try to include the corner of the house and the ground on the other side. It’s hard to tell from a close-up of the tape whether there’s room for a mower to turn once it gets through.

A smaller mower can be a practical choice for a compact backyard. If there’s a lot of grass beyond the gate, the extra mowing time can affect the quote. Mention any second entrance that we could use, even if your family generally uses the side gate.

For lawn mowing in Sarnia, put the gate measurement and approximate backyard size in your estimate request. You can text the gate photo to 519-918-8386 after you send the form.

Call Text Get an Estimate